Maipu SM3100-52TC-AC 설치 매뉴얼 - 페이지 12

{카테고리_이름} Maipu SM3100-52TC-AC에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Maipu SM3100-52TC-AC 19 페이지. Mypower s3100 series

S3100 Install Manual (For SM3100-28TC-AC and SM3100-52TC-AC) V4

Device Installation

To ensure your security and the normal operation of

switch, please carefully read the following instructions and notices while

installing and using MyPower S3100 intelligent stackable secure Ethernet

access switch.

A clean environment is necessary for normal operation of the switch.

No dust is allowed, or, the switch may be damaged by electrostatic

adherence.

The switch requires a non-condensing environment with a temperature

between 0 to 50 °C and a humidity between 10% to 90%,

The switch must be kept in a dry and cool place with sufficient space

around it for air circulation.

The switch requires a power input ranging from 100 to 240 VAC (50 ~

60Hz).

Make sure that the switch is safely grounded, in order to avoid

electrostatic damage to the device and potential dangers to people.

Avoid direct sunlight, and keep the switch away from heat sources and

strong electromagnetic interference sources.

The switch must be stably mounted to a standard 19'' rack or placed

on a desktop.

D u s t a n d P a r t i c l e s

Dust is harmful to the safe operation of the switch, which may lead to poor

contact of metal connectors or contacts caused by electrostatic adherence,

especially under low relative humidity. Such electrostatic adherence may

reduce the product lifespan and increase the chance of operation failures.

The recommended values of dust content and particle diameter of the

switch's working environment are listed below:

Maipu Confidential & Proprietary Information

MyPower S3100

Page 12 of 19

series