afloia Miro pro 사용자 설명서 - 페이지 15
{카테고리_이름} afloia Miro pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. afloia Miro pro 19 페이지. Air purifier & humidifier
페이지 인쇄Troubleshooting
Problem
Coming out nasty smell
The air purifier is not
purifying the area well.
The filter replacement
alert is still blinking after I
changed the filter.
Note : If these suggestions do not work accordingly, please contact Afloia customer service and
await instructions. Do not disassemble, repair or fix anything by yourself.
14
16
Checklist
Is the air purifier in a place
with a lot of smoke and odor?
Should I clean or replace
my filter?
Do you smell plastic?
Is there a burning smell?
The air purifier may be
placed in an area with no
ventilation, or there is an
obstacle near it.
Is there any dust in the
pre-filter?
Are there any objects
blocking the air intake/vent?
Have you removed the filter
from it's packaging?
Is the filter dusty? Maybe it is
time to replace the filter.
Is intake/vent dusty?
Have you reset the filter
change button?
Recommendation
The performance of the air
purifier may decrease over time
if there is excessive smoke and
odor in the area. To remedy this,
please air out the room before
using the air purifier.
Check the filter replacement
indicator and clean or replace
the filter if necessary.
It is common that in the first
uses the smell of plastic will be
emitted.
It will eventually go away. If not,
please contact our customer
service centers.
Turn off your air purifier, unplug
it from the wall and contact our
customer service center.
Ventilate the room and then use
the product. Use the product in
an area not exceeding its cover-
age limit.
(Avoid placing the device where
it is well ventilated like a door or
window.)
Wipe the Pre-Filter
Please remove any objects from
the intake/vent.
The plastic bag of the filter may
not have been removed, so
please open the cover and check
if the plastic bag is removed.
Change the filter if it looks like it
needs to be replaced.
Clean the air vent/intake.
Press and hold the power button
for 7 seconds to reset the filter
replacement alert.