Maisi M20 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Maisi M20에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Maisi M20 17 페이지.
페이지 인쇄
④
G-Sensor
⑤
Motion Detection
⑥
Emergency Recording
⑦
Microphone
⑨
GPS
⑩
Speed Limit
⑪
ADAS
⑫
HDR
⑬
EV
⑭
Video Resolution
⑮
Loop Recording
⑯
Date/Time Stamp
by the camcorder, this icon will show up. Otherwise
it will be a "X".
Indicating the sensitivity of the G-sensor you set.
The higher the blue color stands, the more sensitive
it is.
This icon shows up only when motion detection is
enabled. Please disable it while driving.
This Icon shows up when collision/vibration occurs
and followed by device mandatory file protection.
You can enable the emergency recording by
pressing the Menu button while recording.
It only shows up in Recording Mode. Long press the
OK button to turn it On/Off.
When the GPS model is not inserted, this icon is red;
When the GPS model inserted and is duly
recognized by the camcorder, this icon will turn
green and the camcorder will record route of your
journey as well as the speed with the footage. If the
Date/Time stamp is enabled, you will see the speed
displayed on the right bottom corner of the screen.
Please set the Speed Warning Setting
Only appears when it is enabled (GPS Dongle
required for Lane Departure Warning function)
When resolution is set to HDR _1920x1080@30P, it
appears. HDR function can achieve more clear
images in dark/dim environment.
Exposure Value, "+" means brighter, "-" means
dimmer
The video resolution you set.
The loop setting time you chosen will be displayed in
the middle of this icon. For the current setting, the
loop time is 3 Minutes.
If enabled, the model number/speed/car plate
number/date/ time will be displayed on the right
bottom corner on the screen, and this info will be
saved on the recording.
Only when the GPS model is inserted and
recognized will the speed info be shown.
Page 5 of 16