Gamebox GBHD ADVANCE AGS-001 PCB 설치/조립 매뉴얼 - 페이지 10
{카테고리_이름} Gamebox GBHD ADVANCE AGS-001 PCB에 대한 설치/조립 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamebox GBHD ADVANCE AGS-001 PCB 11 페이지. Both 32 pin and 40 pin varients
페이지 인쇄
Section 7 Continued...: Assembly
Manuever the GBA PCB into position above the GBHD Advance PCB and fasten it down with another
4 short screws. Making sure not to pinch any of the cables and watching that our holes are clear. Fastening them
lightly before tightening in a star pattern, as was done with the lower board. Make sure the shoulder buttons are
clear of the case.
To complete the install, fasten the case halfs together
using the 4 long screws.
Page 10