GameChanger plus pedal 사용자 설명서 - 페이지 5

{카테고리_이름} GameChanger plus pedal에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GameChanger plus pedal 8 페이지. Sustain unit for all melodic instruments

OUTPUTS and SPLIT/MIX switch

The PLUS Pedal features two ¼ inch output jacks labeled "OUT" and "CLEAN

OUT/FSW". There is also a toggle switch on the Pedal's side, labeled SPLIT & MIX.

"OUT" is the PLUS Pedal's main output which can send two kinds of signal:

1) the combined DRY signal coming from your instrument with the WET

signal, this is the PLUS Pedal's most commonly used mode and it can be activated

by setting the above-mentioned toggle switch to "MIX"

2) only the isolated WET signal generated by the PLUS Pedal. This way

your instrument's DRY signal will be muted, but you will still be able to produce

sustained tones as before, by using the foot-pedal.

This mode of playing is called "WET only" – and it comes in very handy when creat-

ing soundscapes, cinematic ambiance and other unworldly sound effects. The WET

only mode can be activated by positioning the toggle switch to "SPLIT".

The second output, labeled "CLEAN OUT/FSW" sends out the unaffected Dry signal

from your instrument at all times. Thanks to this dual output system the PLUS

Pedal offers a lot of diversity when it comes to setting up your signal chain and

creating stereo effects. The "CLEAN OUT/FSW" output also doubles as an input for

the WET Only Footswitch.

Use two amps for a stereo feel;

AMP 1

mixing desk

In a studio setting - it can be

DAW

useful to keep a separate DRY

signal going into a mixing board

or recording software at all

times.

AMP 2