Adexa YSD1ATD 사용자 설명서 - 페이지 6

{카테고리_이름} Adexa YSD1ATD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Adexa YSD1ATD 10 페이지. Potato oven

operating, the voltage error should not beyond

Note: The appliance must be earthed well

The connection of power cord

(a) Use a proper screwdriver to fix the electric cable

(b) Connect the power cord according to the connecting picture

1. When connecting to a power supply, please see picture showed: Insert the

Copper Bridge and power cord under the screw, Screw down the screw of the power

cord, so that make sure the Copper Bridge could hold the power cord tightly.

2. Inproper connection may cause the melt of the power cord due to the heat of the

connecting head.

Attention!

! The appliance should be positioned in an even and dry place

! If the appliance is positioned near to the walls, clapboards, other

kitchen equipments, or decoration boards, etc, these objects should be

made of inflammable materials or covered with inflammable

materials in case of fire risk.

! Equipotential terminal

properly according to the relative electric regulations.

D. Operation

Note: Before using the appliance, please make sure that the supply voltage

complies with the rated voltage marked on the nameplate. During operation, do not

put anything, especially inflammables, such as towels, clothes, etc. on the top of the

top of the appliance. If there is abnormal situation when operating the appliance,

please stop immediately and cut off the power supply.

a. Operation of the Potato Oven

(a) Connect the power supply

±10%.

should be connected

GB/T5465.2-5021