IKEA KULINARISK 403.824.98 매뉴얼 - 페이지 25
{카테고리_이름} IKEA KULINARISK 403.824.98에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA KULINARISK 403.824.98 36 페이지.
페이지 인쇄
ENGLISH
What to do if...
If there is a fault, first try to find a
solution to the problem yourself. If you
cannot find a solution to the problem
yourself, contact an authorized service
center.
PROBLEM
Appliance not stable.
Appliance is not in horizontal
position.
Performance in terms of oil
capture are not satisfying.
Appliance does not work.
The light does not work.
Noise of hood is higher than
customer expectation.
Button A light flashing once per
second.
Button A lights flashing twice per
second.
Before contacting the Authorized Service Centre:
Switch the appliance on again to see if the problem has disappeared. If not, switch
it off again and repeat the operation after an hour.
If your appliance still does not work properly after carrying out the checks listed in
the troubleshooting guide and switching the appliance on again, contact the Author-
ized Service Centre, clearly explaining the problem and specifying:
• the type of fault;
• the model;
• the type and serial number of the appliance (given on the rating plate).
POSSIBLE CAUSE
The appliance is not correctly
installed.
The appliance is not correctly
installed.
Oil and grease on metal filters or
charcoal filters.
The appliance is not correctly
connected.
The LED is broken.
Air outlet diameter in the wall is
too small, causing a pressure drop
and an increase in motor speed.
Product is installed in recirculation
mode.
More than one bend in the ventila-
tion duct.
Grease filter alarm.
Charcoal filter alarm.
If you operated the appliance
wrongly, or the installation was not
carried out according to the Assembly
instructions, the visit from the Author-
ized Service Centre technician may not
take place free of charge, even during
the warranty period.
SOLUTION
Follow the Installation instruction enclosed to the
appliance.
Follow the Installation instruction enclosed to the
appliance.
Follow the cleaning frequency of filters as described
in the user manual.
Verify that the main cable is connected to the mo-
tor group or the plug is connected to the socket.
For replacement, contact the Authorized Service
Centre.
Follow the Installation instruction enclosed to the
appliance.
Product in recirculation mode(and using a charcoal
filter) will generate an higher noise than a product
in extration mode.
If the exhaust system in the building has multiple
bend in or a long distance, this can increase the
noise of the product.
Please clean grease filter and reset alarm. Refer
to care and cleaning guide for maintenance and
control panel guide to reset the filter alarm.
Please clean charcoal filter and reset alarm. Refer
to care and cleaning guide for maintenance and
control panel guide to reset the filter alarm.
25