AGUZZO Streamline S90R534P 설치 지침 - 페이지 4

{카테고리_이름} AGUZZO Streamline S90R534P에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AGUZZO Streamline S90R534P 5 페이지. 304 stainless steel heated towel rail

Installation

STEP 1: Install Mounting Plates

STEP 2: Hard Wire Connection

If hard wiring, an electrician must complete the power connection to a

wall switch or controller.

If you have a Hard Wire Streamline

model the power supply cord must

be connected by a licensed

electrician. The power cord is to be

fed through the centre of the wall

mounting plate into the wall cavity for

connection to a wall switch or

programmable timer/controller.

STEP 3: Affix appliance to wall

Based on the size of the

heated towel rail,

measure and mark hole

positions on your wall.

Drill holes into the wall

and securely fasten the

mounting plates with two

supplied wall plugs and

screws for each mounting

plate or other appropriate

fastners for your wall

composition.

Fasten appliance to

wall. Position mounting

plate covers and heated

towel rail brackets over

the installed mounting

plates. Fasten to the

mounts securely by

tightening the grub

screws on each bracket.

Unless you are installing

a hard-wire model, plug

the cord into a power

point.