Gandy 36T13 부품 및 조립 매뉴얼 - 페이지 5

{카테고리_이름} Gandy 36T13에 대한 부품 및 조립 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gandy 36T13 17 페이지. 24” & 36” spreaders
Gandy 36T13에 대해서도 마찬가지입니다: 운영자 매뉴얼 (8 페이지), 운영자 매뉴얼 (10 페이지)

페이지 인쇄

Step# 2

(Spread Plate Assembly)

1. Locate Spread Plate (2836878).

2. Slide rolled edge (side without bend) of spread plate onto bearing retainer rod as shown in Diagram #7.

3. Re-install the last bearing retainer to hopper and spread plate re-using the 5/16" washer and wing nut.

3. Adjust bearing retainers so spread plate can pivot freely. Tighten both 5/16" wing nuts securely.

Diagram #7

Step# 3

(Tire Assembly)

Install tire (R02-0013-000) to rotor bar shaft end using the 3/16 x 1-3/4 clevis pin (C22-0187-090) and

3/32 x 3/4 cotter pin (C20-0093-020). Pin tire to the hole in the rotor bar that is closest to hopper.

Repeat for other tire.

Diagram #8

Page 5 of 17

2836-A1