Afriso EURO-INDEX Unimes E 사용 설명서 - 페이지 16
{카테고리_이름} Afriso EURO-INDEX Unimes E에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Afriso EURO-INDEX Unimes E 20 페이지. Mechanical tank contents gauge with electronic remote indication
페이지 인쇄Operation
6.9
Mounting the direct indication gauge
7
Operation
7.1
Switching Unimes E on and off
16
Maximum liquid level
The pointer of the direct indication gauge points to 100 %.
The arrow at the bottom of the display points to the unit "Level"
(FH). The display shows the maximum liquid level in mm meas-
ured by the direct indication gauge.
1.
Overwrite the displayed value to correct the displayed maximum
liquid level: Set the liquid level in mm with the
By pressing the
The
key allows you to change the selected digit within a
range from 0 to 9.
2.
Press the F key to accept the setting.
You have now entered all the tank data and the remote indicator
switches to normal measurement mode.
The symbol
longer shown.
1.
Slowly lower the float into the tank.
2.
Screw the direct indication gauge into the tank.
Direct indication gauge
The direct indication gauge is always on.
Remote indicator
Press the F key to switch on the display of the remote indicator.
The remote indicator automatically switches off approx. 2 ½
minutes after the last time a key was pressed.
The display shows OFF.
In this mode, the battery is not discharged. By pressing the F key,
you switch on the remote indicator for another 2 ½ minutes, i.e. the
level is indicated.
key, you can select the digit to be changed.
in the upper left corner of the display is no
and
keys.
Unimes E