HIKVISION DS-9000HFI-ST 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} HIKVISION DS-9000HFI-ST에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-9000HFI-ST 13 페이지. Hybrid dvr and nvr

HYBRID DVR/NVR/ANALOG

10. Adding IP Cameras

Adding IP Cameras

Directly on the Hybrid DVR and NVR's Menu:

1. Enter the Add/Remove Cameras menu by going to Main Menu > Cameras Setup > Cameras.

2. Select the IP Camera tab.

3. Click the Search button to automatically detect connected IP cameras on the network.

4. If the detected IP cameras and DVR are not on the same subnet, you can modify the camera's IP,

subnet and port settings by clicking on the

5. Input the camera's password in the password field. Click the Add button to add the IP camera to

the Added Cameras list. Please note the camera's status will show as disconnected initially.

Click the refresh button to obtain a connected status. You can also click the play icon to

verify a successful connection to the camera.

6. Once an IP camera has been added to the Added Cameras list, you may remove the camera by clicking

the Trashcan icon or view the camera by clicking the Play icon.

7. Go to Main Menu > Recording Configuration > Recording Quality to setup IP camera recording

resolution, frame rate, etc.

Using Internet Explorer

1. Connect to the DVR by typing the IP address in the address bar

2. Login to the DVR as above.

3. Click on Configuration > Camera Management > IP Camera

4. Enter the camera IP Address and other appropriate information on the right side of the screen.

5. Repeat to add more cameras.

next to camera's IP address.