HIKVISION DS-9600NI-H8 설치 매뉴얼 - 페이지 12

{카테고리_이름} HIKVISION DS-9600NI-H8에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-9600NI-H8 14 페이지.

Installation Manual of DS-9600NI-H8

Steps:

Enter BIOS interface when starting process by pressing F2 on keyboard.

Enter Advance settings interface by pressing direction buttons and Enter button on keyboard.

Boot > Legacy > Normal Boot Menu > Advance

Set the CD/DVD-ROM Drive as the first boot type.

4.3 Installing Operating System

Before you start:



If you use a SATA CD/DVD-ROM drive, connect it to the interface of eSATA.



If you use a USB CD/DVD-ROM drive, connect it to any of the USB interfaces.



If you use a SATA disk as the system disk, connect it to the eighth HDD slot, which is located at low-right corner after

opening the front panel. The Windows 7 OS, Windows 8 OS and Linux OS can be installed on the NVR directly.

Step:

Insert the Windows installation CD and install the operating system.

Figure 4. 6 Boot Configuration Interface

Figure 4. 7 Setting the Boot Type