Avaya 1616 최종 사용자 설명서 - 페이지 15

{카테고리_이름} Avaya 1616에 대한 최종 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 1616 20 페이지. Ip office essential h323 ip phone telquest tech support
Avaya 1616에 대해서도 마찬가지입니다: 사용 설명서 (1 페이지), 사용 설명서 (2 페이지), 데이터시트 (4 페이지), 브로셔 (2 페이지), 사용자 설명서 (4 페이지), 참조 매뉴얼 (4 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (2 페이지), 설정 (3 페이지), 빠른 참조 (2 페이지), 빠른 참조 (2 페이지)

페이지 인쇄
Avaya 1616 최종 사용자 설명서
4. Select Redial.
5. Press the Change softkey or the OK button to toggle between One and List.
If you selected One, then using the redial function will cause the phone to dial the last number you dialed.
o
If you selected List, then using the redial function will cause the phone to display a list of the last numbers you
o
dialed and permit you to choose.
6. To exit this screen press the Phone/Exit button.
To change the ring pattern:
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Personalized Ringing.
5. Press the Select softkey or the OK button.
6. Scroll up or down to see a list of the available ring patterns.
7. Select a ring pattern to listen to it. If you want to hear it again, press the Play softkey.
8. Press the Save softkey.
Your new ring pattern is saved.
o
9. To exit this screen press the Phone/Exit button.
To adjust the brightness of the display:
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Brightness.
5. Press the Select softkey or the OK button.
6. Scroll to the right or left to adjust the brightness.
7. To exit this screen press the Phone/Exit button.
To turn button click sounds on:
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Button Clicks.
5. Press the On softkey, the OK button, or the right or left navigation arrow to turn the sounds on.
6. To exit this screen press the Phone/Exit button.
To turn button click sounds off:
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Button Clicks.
5. Press the Off softkey, the OK button, or the right or left navigation arrow to turn the sounds off.
6. To exit this screen press the Phone/Exit button.
To turn error tones on:
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Error Tones.
5. Press the On softkey, the OK button, or the right or left navigation arrow to turn error tones on.
6. To exit this screen press the Phone/Exit button.
To turn error tones off:
1. Press the A button.
2. Select Screen/Sound Options.
3. Press the Select softkey or the OK button.
4. Select Error Tones.
5. Press the Off softkey, the OK button, or the right or left navigation arrow to turn error tones off.
1616 IP Telephone End User Guide | 15 |
P a g e