Makita 6226DWE 사용 설명서 - 페이지 9

{카테고리_이름} Makita 6226DWE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6226DWE 19 페이지. 9.6 v i2 v 14.4 v
Makita 6226DWE에 대해서도 마찬가지입니다: 사용 설명서 (19 페이지), 사용 설명서 (19 페이지), 사용 설명서 (19 페이지)

페이지 인쇄

Trickle charge (Maintenance charge)

If you leave the battery cartridge in the charger to prevent spontaneous discharging after

full charge, the charger will switch into its "trickle charge (maintenance charge)" mode and

keep the battery cartridge fresh and fully charged.

Tips for maintaining maximum battery life

Charge the battery cartridge before completely discharged.

Always stop tool operation and charge the battery cartridge when you notice less tool

power.

Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room temperature at 10°C

40°C

(50°F

104°F).

Let a hot battery cartridge cool down before charging

it.

Switch action

CAUTIO N:

Before inserting the battery cartridge into

the tool, always check to see that the

switch trigger actuates properly and returns

to the "OFF" position when released.

To start the tool, simply pull the trigger.

Tool speed is increased by increasing pres-

sure on the trigger. Release the trigger to

stop.

Reversing switch action

CAUTION:

*Always check the direction of rotation before operation.

*Use the reversing switch only after the tool comes to a complete stop. Changing the

direction of rotation before the tool stops may damage the tool.

*When not operating the tool, always set

the reversing switch lever to the neutral

position.

This tool has a reversing switch to change

the

direction of rotation. Depress the

reversing switch lever from the A side for

clockwise rotation or from the B side for

counterclockwise rotation. When the switch

lever is in the neutral position, the switch

trigger cannot be pulled.

ReveJing r i t c r

Clockwise

Counterclockwise