Align-Pilates C1 조립 지침 매뉴얼 - 페이지 3

{카테고리_이름} Align-Pilates C1에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Align-Pilates C1 16 페이지. Full cadillac

3. Attaching the legs
Begin by inserting the frame into the legs. Ensure that the frame head end and the head end
legs are at the same end. These have pre drilled holes as per Fig.1. Attach them using x32 small
nuts and washers provided - x8 per corner, x4 on the outside of the frame (Fig.2) at each corner
and x4 on the inside of the frame at each corner (Fig.3).
4. Attaching the leg brackets
Attach the leg brackets using the x4 medium bolts and washers with
loctite through the frame, Fig.4. Using x3 small bolts with washers attach the top of the bracket to
the underside of the frame with x2 bolts and washers and then into the vertical leg from the inside
with the last bolt and washer. Now bolt on the mattress - there are 2 bolt holes though each of
the two end cross supports Your frame should now look as
below in Fig.5. To secure the legs, use x2 of the x4 long bolts at either end, insert vertically into the
frame (Fig.6).
Fig.4
5. Attaching the headrest
To attach the headrest use x4 bolts into the frame in the drilled headrest holes shown in Fig.7.
Fig. 1
Fig. 2
Fig. 5
Fig. 7
Fig. 3
Fig. 6
3