Align-Pilates C2-Pro 조립 지침 및 사용자 설명서 - 페이지 4

{카테고리_이름} Align-Pilates C2-Pro에 대한 조립 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Align-Pilates C2-Pro 12 페이지. Reformer

End Stopper

4. Runner stoppers

Having installed the carriage now screw the stoppers back in hand

tight. The stoppers prevent the carriage from hitting the rope risers and

are designed to allow for quick removal of the bed for cleaning &

maintenance, (Fig.6). Simply unscrew to get access and ensure you

re-screw them back in before use.

5. Shoulder rests

Insert the shoulder rests into each of the shoulder rest

Fig.6

receiving holes on the carriage bed. They can be locked in place by

placing the locking pin through the hole at the bottom of the chromed bar (Fig. 8). The locking pins are attached on

a string to the underside of the carriage as shown in Fig 8.

Fig.7

Fig.8

6. Attaching the rope risers:

Part screw in the 2 adjustment knobs and insert the riser (Fig.9 & 10), then pull back on the knob and slide the riser to

the desired height. When happy with the height let go of the knob and twist to tighten and secure the riser in place

(Fig.11).

Fig.9

Fig.10

Fig.11

7. Attaching the Silent ropes:

First attach the silent handles by threading the nylon loop of the handle through the rope eyelet and then thread the

loop handle through the nylon eyelet to secure the handle to the rope as per Figs. 8, 9 & 10. Pull tight to check it is

secure.

Fig.12

Fig.13

Fig.14

Now move the gear bar to the position nearest the standing platform and move the carriage stopper to the cor-

responding position so the bed is rolled to furthest point toward the foot end of the reformer (Fig.15). Now attach all

the springs to the relevant hooks on the gear bar to stop the carriage rolling (Fig.16). Take each rope and loop them

over the upright rope holder on the shoulder rests, then take the end of each corresponding rope and thread these

through each of the silent pulleys.