Align-Pilates M2-Pro Reformer 조립 지침 및 사용자 설명서 - 페이지 4

{카테고리_이름} Align-Pilates M2-Pro Reformer에 대한 조립 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Align-Pilates M2-Pro Reformer 12 페이지. Reformer

2. Unpacking the second outer box:

a. Carefully take off the lid of the carriage bed box and remove the bubble wrap - do not use a knife as you may

cut the vinyl - (you will notice there is a second box, please remove and put aside for use later in assembly) see

Fig.12.

b. We recommend 2 people remove the carriage bed from the box. It is best to familiarise yourself with the

underneath of the carriage at this point, so you are familiar with the functionality, including the side wheel

adjustment, spring attachment system and carriage anti-tipping device (Fig.13).

c. You will need to insert the carriage bed (2 people required) at an angle so the anti-tipping system does not hit

the runner (please bear this in mind when removing the carriage in future - you can only lift up one side) . You will

also need to ensure the bed is correctly orientated with the springs towards the padded footbar prior to inserting

(Fig.14).

d. It's now time to open the smaller box from the second carton, which contains the maple rope risers, the

shoulder rests, pulleys, ropes and handles (Fig.15).

x2 maple

rope risers

double loop

x2 silent

handles

Fig.12

Fig.14

x2 shoulder

rests

Fig.13

x2 silent

rope pulleys

x2 silent

ropes

Fig.15