Align-Pilates M8-Pro Reformer 조립 지침 및 사용자 설명서 - 페이지 5

{카테고리_이름} Align-Pilates M8-Pro Reformer에 대한 조립 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Align-Pilates M8-Pro Reformer 12 페이지.

e. Attach the maple rope risers using 8 of the M8 x 65mm bolts located in the bolt pack (from the carriage box).
The bolts are inserted from the outside of the frame with the larger washer on the outside and small washer on
the inside. Use the supplied socket spanner to hold the bolt as you tighten with the allen key. Do all the bolts up
to hand tight, then go round and tighten them fully (Fig.16). Once tight, insert the black blocking plugs (Fig.17)
and repeat for the second riser.
f. You will now be able to attach the silent pulleys - there is a single washer which goes on the knob side of the
pulley. We suggest during set-up to install the silent pulleys in the highest position, (Fig.18).
Washer
g. Insert the shoulder rests and lock into place with the locking pin for additional security (Fig.19). Please note the
shoulder rests are asymmetric, so you can have a wider or a narrower setting for the shoulders, therefore be sure
to insert them correctly.
h. Now attach the handles to the rope by threading the loop through the rope eyelet and then threading the
handle through the loop, see images from Fig.20 - 22.
Fig.16
Washer
Fig.20
Black Blocker Plug
Fig.18
Locking
pin
Fig.19
Fig.21
Fig.17
Fig.22
5