AEG 49669GO-MN 사용자 설명서 - 페이지 15

{카테고리_이름} AEG 49669GO-MN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 49669GO-MN 38 페이지. 90cm

페이지 인쇄

UsING yoUr oVEN (coNtINUED)

setting the delayed start cooking time

the "cook time" and "stop time" functions can be

combined to switch the oven on and off at a specific

time during the day .

1 . select the desired oven function and

cooking temperature .

2 . press timer symbol

"cook time" ❘➔❘ symbol appears .

3. S et the desired cooking time by using – or + , whilst

the "timer arrow"

4 . press timer symbol

"end time" ➔❘ symbol appears flashing

5. S et the desired switch-off time using the – or +

whilst the "timer arrow"

time" ❘➔❘ and "end time" ➔❘ arrows are lit to confirm

that the oven has been programmed .

on completion of cooking

when the set time has elapsed, a signal will sound for 1

minute, the oven will switch off and the remaining time

indication "0 .00" will appear on the display .

1. To stop the signal, press "+" or "–".

setting the minute minder

for setting a countdown period . when the period of

time has elapsed, an audible signal is sounded .

NOTE: This feature has no effect on the oven

operation.

1 . press timer symbol

the "minute minder" symbol

Set the desired length of time using – or + whilst

the "timer arrow"

from the last time adjustment the "timer arrow"

will disappear and the minute minder has been set .

Once the set time has elapsed, a signal will sound

for 1 minute . the time indication "0 .00" and a

flashing "minute minder" symbol

the display .

2. T o stop the signal, press "+" or "–".

Using fHU (fast Heat Up) mode

to quickly and efficiently preheat your oven, it is

recommended to select the "fast heat"

cooking feature .

1 . Ensure the appliance is on by pressing the

oven lights will light .

2 . select the desired oven function by pressing

3. S et the cooking temperature by pressing the – or +

to decrease or increase the temperature .

NOTE: The temperature can only be adjusted when

the degrees symbol "°" is flashing.

the temperature setting changes in increments of 5°c .

4 . press the symbol

on the temperature display .

5 . when the set temperature is reached the buzzer

will sound and the set temperature will be displayed .

NOTE: "FHU" cannot be selected if the oven

temperature is above the preset temperature.

as often as necessary, until the

is flashing .

as often as necessary, until the

is flashing . the "cook

as often as necessary, until

appears flashing .

is flashing . after 5 seconds

will appear on

. the

. the letters "fhu" will appear

Activating the child-proof lock

when the child lock is engaged, the oven cannot be

switched on .

1 . switch off the appliance using the

2 . press

and – at the same time, hold until

the word "safE" is displayed .

the child-proof lock is now engaged .

NOTE: When the child-proof lock function is active the

time of day and minute minder can only be set.

releasing the child-proof lock

1 . press

and – at the same time, hold until the word

"safE" is cleared from the display . the child-proof

lock is now released and the oven is ready to use .

Beep on touch

the beep sound can be activated anytime when a

symbol is pressed .

1 . Ensure the oven is off by pressing

2 . press

and + simultaneously for 2 seconds,

a single beep will sound to confirm the operation .

repeat the above procedure to reset the beep on

touch mode . as default, the beep on touch

mode is off .

safety cut-out feature

the oven automatically switches itself off if the

temperature is not adjusted or the appliance is left

operating after a period of time . the oven switches

itself off after:

• 2 0 hours when set between 30°C and 120°C

• 8.5 hours when set between 120°C and 200°C

• 5.5 hours when set between 200°C and 250°C

Demonstration Mode – programmable controller

models

for display purposes, the appliance has a

demonstration mode to enable demonstration of

oven functionality without consuming power . In

demonstration mode, the display, the light and the fan

only are operational .

when the appliance is in demonstration mode and the

display is switched on, the clock symbol

If the appliance is in demonstration mode, to operate

the appliance normally the demonstration mode will

need to be deactivated .

to deactivate demonstration mode

1 . press symbol

mode .

2 . press simultaneously the timer symbol

5 seconds .

will be on .

until the display returns to stand by

and "-" for