AEG 79669GO-MN 사용자 설명서 - 페이지 20

{카테고리_이름} AEG 79669GO-MN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 79669GO-MN 48 페이지.

페이지 인쇄

1. Bek722910M

GETTING TO KNOW YOUR GAS COOKTOP

Using your gas hotplates

NOTE: Gas controls turn anticlockwise from 'Off' and

have limited movement.

Lighting burners

Electronic ignition

These hobs are fitted with mains powered electronic

ignition . When the appliance has been connected and

power is on, depressing any knob will release the spark

to all burners .

To light a burner, depress the corresponding knob and

while continuing to depress knob, turn anticlockwise to

"HI" position . After establishing the flame, continue to

hold the knob for 5 seconds, before releasing .

If the flame goes out when the knob is released, simply

depress the knob again, this time holding it down with

slightly more force for the same length of time .

Knob may be turned further anticlockwise to reduce the

flame as desired .

• Keep hands clear of burners when lighting .

• If burner does not light within 5 seconds, turn knob to

'Off' position, allow gas to disperse, then try

lighting again .

• Burners MUST be operated between 'HIGH' and

'LOW' settings only .

• Trivets get very hot . Allow plenty of time to cool

before touching .

To conserve gas, place the pan centrally over the

burner and adjust the flame so that it does not go past

the edge of the cookware .

NOTE: In the absence of electrical power, carry out the

ignition directly to the burner with a hand held ignition

source.

WARNING!

Model 79669GO-MN

1. Low heat burner

Used for simmering with small cookware items .

2. Medium heat burner

Used for normal cooking and simmering with mid

size cookware items .

3. High heat burner

Used for fast heating with large size

cookware items .

4. Intense heat wok burner

Used for very fast heating with woks and other

large size cookware items . Use wok trivet provided

when cooking with a wok .