Alirac ECL-160 운영 매뉴얼 - 페이지 16

{카테고리_이름} Alirac ECL-160에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alirac ECL-160 16 페이지.

(Figures for reference are subject to change without notice.)

No.

Description

ECL Welder

Operator's Manual

Electrode Holder

Earth Clamp

Face Mask with Filter

Brush & Hammer

NOTES: All above mentioned are based on the ordering contact unless otherwise

agreed by the parties.

* This machine is an indoor equipment and the attacks of rain and snow should be

avoided in the process of transportation and storage. While loading and unloading,

more attention should be paid on the package with words of warning. Storage

warehouse should be kept dry with good air circulation and no corrosive gas or dust.

The temperature should be maintained from -25℃ to 55℃ and relative humidity

must be lower than 90%.

* If the products are still needed to continue storing after stripping, repacking

should be carried out according to original package's requirement. Remember before

storage, don't forget to clean and seal it with plastic bags.

* Users should maintain the cartons and shock blocks in order to be properly

packaged in need of long distant transportation. For the long distant transportation, it

should be retrofitted with a wooden case and mark the "up" or "rain" symbols.

Circuit Schematic of ECL Welder

9 Accessories

Qty.

1set

1pc