Garmin GPS 500 빠른 참조 - 페이지 18

{카테고리_이름} Garmin GPS 500에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPS 500 23 페이지. 500 series
Garmin GPS 500에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (27 페이지), 파일럿 매뉴얼 부록 (4 페이지), 빠른 참조 (17 페이지), 파일럿 매뉴얼 부록 (22 페이지), 설치 매뉴얼 (14 페이지), 매뉴얼 (6 페이지)

SELECT AN APPROACH

Selecting an approach:

Press the PROC Key to display the Procedures

Page.

Turn the large right knob to highlight 'Select

Approach?' and press the ENT Key.

A window appears listing the available

procedures. Turn the large right knob to

highlight the desired procedure and press the

ENT Key.

A second window appears listing the available

transitions. Turn the large right knob to

highlight the desired transition waypoint and

press the ENT Key. The approach 'Vectors'

option assumes the pilot will receive vectors

to the final course segment of the approach

and will provide navigation guidance relative

to the final approach course.

Turn the large right knob to highlight 'Load?'

or 'Activate?' and press the ENT Key. 'Load?'

adds the procedure to the flight plan without

immediately using it for navigation guidance.

This allows the pilot to continue navigating the

original flight plan, but keeps the procedure

available on the Active Flight Plan Page for

quick activation when needed.

For precision approaches and some non-

precision approaches, a reminder window

appears indicating that GPS guidance on

such approaches is strictly for monitoring only

— use the VLOC receivers and external CDI

(or HSI) for primary navigation. To confirm this

reminder, highlight 'Yes?' and press the ENT

Key.

Not all approaches in the database are approved for GPS

use. As the pilot selects an approach, a 'GPS' designation

to the right of the procedure name indicates the procedure

can be flown using the GPS receiver. Some procedures

do not have this designation, meaning the GPS receiver

may be used for supplemental navigation guidance only.

ILS approaches, for example, must be flown by tuning

the external VLOC receiver to the proper frequency and

coupling the VLOC receiver to the external CDI (or HSI).

GPS 500 Quick Reference

190-00181-61 Rev. D