AlkaWay UltraStream 420080 설치 매뉴얼 - 페이지 2

{카테고리_이름} AlkaWay UltraStream 420080에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AlkaWay UltraStream 420080 2 페이지.

Cold water connection

1. Hand tighten the cold-water connector

pieces together.

2. Turn off the cold-water supply. Using the

shut-off valve below the sink or at the

house water mains.

3. After shutting off the water open the

kitchen faucet draining the remaining

water out of the line. Turn on a (lower)

garden tap to drain the water line.

4. Place a container below the sink, under

the shut off valve and disconnect the cold-

water line.

5. Install the cold-water connector (Make

sure it's turned OFF).

6. Reconnect the cold-water line.

Tube connections

Connect the tube into position as per the

Schematic (refer to page 1).

Above the sink: use the supplied ¼" tube

connects the tap to the UltraStream. The

UltraStream connection is inside the base.

Remove the base cover to access connection.

Under the sink: The tube from under the tap

connects to the cold-water connection.

Turn blue tap on the colder water connector

check for leaks.

Refer to the UltraStream manual to complete the UltraStream installation.

Version 3 - Dec 18