AEG F45078I-M 사용자 설명서 - 페이지 18
{카테고리_이름} AEG F45078I-M에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG F45078I-M 19 페이지. 18” fully integrated dish washer
AEG F45078I-M에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 일반 매뉴얼 (43 페이지)
페이지 인쇄
EN
5
TROUBLESHOOTING
The dishwasher can signal a number of malfunctions by turning on various indi-
cator lights, as described below (see following table):
E1
E2
E3
E4
E5
E6
18
USER INSTRUCTIONS
FAULT
END
END
END
END
END
END
DESCRIPTION
Acquastop failure
The anti-fl ooding system has tripped. Activates in
case of water leaks. Contact the technical assistance
service.
Safety level
The system limiting the water level in the dishwasher
has tripped. Interrupt the current program and
switch off the dishwasher. Switch it back on again,
program a new cycle and press start. If the problem
persists, contact the technical assistance service.
Water heating malfunction
The water is not heated or is incorrectly heated.
Repeat the washing program; if the problem persists,
contact the technical assistance service.
Water temperature monitoring malfunction
Interrupt the current program and switch off the
dishwasher. Switch it back on again, program a new
cycle and press start. If the problem persists, contact
the technical assistance service.
Water intake malfunction
The appliance does not take in water or does so
incorrectly. Make sure the water connections are
correct, that the water supply tap is open and that
the fi lter is not clogged. If the problem persists,
contact the technical assistance service.
Water pump-out malfunction
The appliance does not pump out the water or
does so incorrectly. Make sure the drain hose is not
kinked or crushed and that the siphon and fi lters
are not clogged. If the problem persists, contact the
technical assistance service.
Tab. 4-01a
Rev 0.0