AEG F55210VI0 사용자 설명서 - 페이지 15

{카테고리_이름} AEG F55210VI0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG F55210VI0 20 페이지.

페이지 인쇄

Problem

There are bluish layers on

glasses and dishes.

The dishes are wet and dull.

9.3 Error codes

Code

10. INSTALLATION

10.1 Assembly

Make sure to position the

appliance with minimum

space of 50mm on both

sides of fully open door.

Keep 5 mm distance between both sides

of the appliance and the cabinet. There

are two possibilities for the cabinet hole

for the appliance.

Possible cause

The rinse aid dosage is too

high.

The detergent can be the

cause.

A programme without a dry-

ing phase has been selec-

ted.

The rinse aid dispenser is

empty.

Meaning

Longer inlet time

Overfilled

Power cord, drain hose and water

supply line hole. To facilitate a

proper installation, position the hole

to the right or the the left of the

appliance.

ENGLISH

Possible solution

Set the rinse aid dispenser

to a lower position.

Try a different brand of de-

tergent.

Set a programme with a dry-

ing phase.

Fill the rinse aid dispenser

with rinse aid.

Possible cause

Tap is not open or water in-

take is restricted or water

pressure is too low

Too much inlet water or

some dishwasher element

leaks

100

min.

443mm

min.

550 mm

min.

555mm