Brother DCP-116C 빠른 설정 매뉴얼 - 페이지 21

{카테고리_이름} Brother DCP-116C에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-116C 33 페이지.

Installing the Driver & Software

Carefully guide the USB cable into the trench

as shown below, following the trench around

and toward the back of the machine.

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock.

Gently push the scanner cover support down

and close the scanner cover.

Turn on the machine by plugging in the power

cord.

Choose USB and then click OK.

Click GO, then Applications.

Double-click the Utilities folder.

Double-click the Printer Setup Utility icon.

Note

For Mac

OS X 10.2.x users, open Print Center

icon.

Click Add.

Choose USB. (For Mac OS

users)

Note

X 10.4 users, go to step 19.

For Mac OS

Macintosh

X 10.2.4 to 10.3