Brother DCP-7060D 고급 사용자 설명서 - 페이지 6

{카테고리_이름} Brother DCP-7060D에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-7060D 24 페이지. Printers
Brother DCP-7060D에 대해서도 마찬가지입니다: 고급 사용자 설명서 (33 페이지), 빠른 설정 매뉴얼 (20 페이지), 빠른 설정 매뉴얼 (20 페이지), 빠른 설정 매뉴얼 (15 페이지), 기본 사용 설명서 (5 페이지)

페이지 인쇄
Brother DCP-7060D 고급 사용자 설명서
Chapter 1
While the machine is in sleep mode the LCD
will show Sleep.
a
Press Menu.
b
Press a or b to choose 1.General
Setup and press OK.
c
Press a or b to choose 2.Ecology and
press OK.
d
Press a or b to choose 2.Sleep Time
and press OK.
e
Press a or b to select the length of time
the machine is idle before entering sleep
mode.
Press OK.
f
Press Stop/Exit.

Deep Sleep mode

If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will automatically enter Deep
Sleep mode, and the LCD will show Deep
Sleep. Deep Sleep mode uses less power
than Sleep mode. The machine will wake up
and start warming up when the machine
receives computer data or when you press a
key on the control panel.
(For DCP-7055W / DCP-7057W /
DCP-7070DW)
If a wireless network is enabled, the machine
does not enter Deep Sleep mode. To disable
the wireless network, see Chapter 3 in the
Network User's Guide.
2

Toner Settings

Toner Setting (Continue Mode)

You can set the machine to continue printing
after the LCD shows Replace Toner.
The machine will continue printing until the
LCD shows Toner Ended.
The default setting is Stop.
a
Press Menu.
b
Press a or b to choose 1.General
Setup and press OK.
c
Press a or b to choose 4.Replace
Toner and press OK.
d
Press a or b to choose Continue or
Stop, press OK.
1
e
Press Stop/Exit.
Note
• If you continue printing in the Continue
mode, we cannot guarantee the print
quality.
• While using Continue mode the print may
appear faint.
1
1