AEG 35772G-M 지침 책자 - 페이지 16

{카테고리_이름} AEG 35772G-M에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 35772G-M 25 페이지.

Fitting the Hob into the worktop

Carry out the building in of the hob as follows:

put the seals

supplied with the hob, on

the edges of the cut out:

place them exactly on the

front and rear edge and at

50 mm. from the side

edges, as shown in the

diagram, taking care that

the seals meet without

overlapping;

place the hob in the

cut out, taking care that it is

centred;

fix the hob with the

relevant fixing clamps and

screws, as shown in the diagram.

When the screws have been tightened, the excess seal can be removed.

The edge of the hob forms a double seal which prevents the ingress of liquids.

FO 2753

FO 0199

Seal