AEG 6310 K-m 지침서 - 페이지 20

{카테고리_이름} AEG 6310 K-m에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 6310 K-m 33 페이지. Ceramic glass hob
AEG 6310 K-m에 대해서도 마찬가지입니다: 지침서 (29 페이지)

AEG 6310 K-m 지침서
Caution: In order to avoid a hazard this
appliance must be installed according to
these instructions for installation
The appliance unit can be mounted in
any type of kitchen with a work top
whose thickness is between 28 mm and
40 mm.

Clearance

The distance between the top side of the
work top and the carpentry underneath
must be at least 47 mm.

Fixing

Screw the fixing brackets out to such an
extent that they can be turned in under
the work top. Tighten the brackets on to
the work top with an ordinary
screwdriver.

Cut-out measurements

One rectangular hole is sawn out for the
appliance combination chosen.
The depth of the cut-out for any unit is:
490 mm
Length of hole = sum of all units`
externally measured length, less 20 mm.
Mounting of Reinforcement
Beams
A reinforcement Beam, with supporting
flanges at each end, is included with
each two-burner unit. For unit
combinations, a reinforcement beam
must be used between each unit.