Brother DCP-J572DW 참조 매뉴얼 - 페이지 16
{카테고리_이름} Brother DCP-J572DW에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J572DW 32 페이지. Brief explanations for routine operations
Brother DCP-J572DW에 대해서도 마찬가지입니다: 참조 매뉴얼 (34 페이지), 빠른 설정 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (2 페이지), 매뉴얼 (19 페이지), 빠른 설정 매뉴얼 (2 페이지), 제품 안전 매뉴얼 (21 페이지)
페이지 인쇄
7
Fax
Before Faxing
Telephone Line Interference/
VoIP
Related Models:
MFC-J491DW/MFC-J497DW
If you are having problems sending or
receiving a fax due to possible interference on
the telephone line or if you are using a VoIP
system, we recommend changing the modem
speed to minimise errors in fax operations.
1
Press Settings.
2
Press a or b to select the following:
a. Select [Initial Setup].
Press OK.
b. Select [Compatibility].
Press OK.
c. Select [Normal] or [Basic(for
VoIP)]. Press OK.
• [Basic(for VoIP)] reduces
the modem speed to 9,600 bps
and turns off colour fax receiving
and Error Correction Mode
(ECM), except for colour fax-
sending. Unless interference is a
recurring problem on your
telephone line, you may prefer to
use it only when needed.
To improve compatibility with
most VoIP services, Brother
recommends changing the
compatibility setting to
[Basic(for VoIP)].
• [Normal] sets the modem
speed at 14,400 bps.
3
Press Stop/Exit.
• VoIP (Voice over IP) is a type of phone
system that uses an Internet
connection, rather than a traditional
phone line.
Send a Fax
Related Models:
MFC-J491DW/MFC-J497DW
1
Load your document in the ADF or place
it on the scanner glass.
2
Press
(FAX).
The LCD displays:
Press Start
Enter Number
Fax Resolution
Standard
Contrast
3
Enter the fax number in one of the
following ways:
• Dial Pad (Enter the fax number
manually.)
Press all digits of the number using
the dial pad.
• Redial (Redial the last number you
dialled.)
Press Redial/Pause.
• Outgoing call (Select a number from
the Outgoing Call history.)
Press a or b to select the following:
a. Select [Call History].
Press OK.
b. Select [Outgoing Call].
Press OK.
Auto
15