2N Lift8 간단한 매뉴얼 - 페이지 10

{카테고리_이름} 2N Lift8에 대한 간단한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2N Lift8 12 페이지. Io module
2N Lift8에 대해서도 마찬가지입니다: 간단한 매뉴얼 (8 페이지), 간단한 매뉴얼 (12 페이지), 간단한 매뉴얼 (13 페이지), 간단한 매뉴얼 (14 페이지), 간단한 매뉴얼 (6 페이지), 간단한 매뉴얼 (17 페이지)

Output Relay Connection

Every I/O Module is equipped with 4 bistable relays with the maximum load of 250 V / 5 A

per contact. Never exceed this limit to avoid system damage. When the relay is closed,

the respective LED signals this state. You can configure the relay function in

the 2N

Service Tool application.

Warning

Never exceed the voltage and current limits specified in the Technical



Parameters for the load applied to the relay contacts to avoid system damage.

Warning

Never connect any important structural devices such as brakes, door locks,



security equipment, etc. to the relay outputs. The I/O Module is not

designed and must not be used for such installations. Connect only the

devices that will not be damaged by unexpected relay contact disconnection

(CU remote upgrade, bus restart, etc.) such as unimportant signalling lamps,

ventilators, shaft lights, etc.).

The manufacturer shall not be held liable for damage incurred as a



result of improper installations on the relay contact.