Fujitsu Lifebook C2010 바이오스 매뉴얼 - 페이지 7
{카테고리_이름} Fujitsu Lifebook C2010에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Lifebook C2010 31 페이지. Bios setup utility
Fujitsu Lifebook C2010에 대해서도 마찬가지입니다: 소프트웨어 설명서 (39 페이지)
페이지 인쇄
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Heads:
A number
n
between
1 and 16
Sectors:
A number
n
between
0 and 63
Maximum
Display only
n
Capacity:
LBA Format (Logical Block Addressing)
Total
–—
Sectors:
Maximum
–—
Capacity
Multi-
Disabled
n
Sector
2 Sectors
n
Transfers:
4 Sectors
n
8 Sectors
n
16 Sectors
n
LBA Mode
Disabled
n
Control:
Enabled
n
Transfer
Standard
n
Mode:
Fast PIO 1
n
Fast PIO 2
n
Fast PIO 3
n
Fast PIO 4
n
Multiword
n
DMA 1
Multiword
n
DMA 2
Default
Description
–—
This appears only when Hard Disk is selected. When Hard Disk is
selected, you can change the value. This field is incremented by
pressing the [Spacebar]) or by pressing [Shift] [+]. This field is
decremented by pressing the [-] key. The field can also be
changed by typing in the number.
–—
This appears only when Hard Disk is selected. When Hard Disk is
selected, you can change the value. This field is incremented by
pressing the [Spacebar]) or by pressing [Shift] [+]. This field is
decremented by pressing the [-] key. The field can also be
changed by typing in the number.
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Hard Disk is selected.
–—
The total number of sectors on your hard disk.
–—
The maximum capacity of your hard disk.
[16 Sectors]
This option cannot be changed when Auto is selected. Specify
the number of sectors per block for multiple sector transfer.
[Enabled]
Enables or disables Logical Block Addressing in place of Cylinder,
Head, Sector addressing. This can't be changed when Auto is
selected.
[Multiword
Selects the method for moving data to/from the drive. Autotype
DMA 2]
the drive to select the optimum transfer mode. This option
cannot be changed when Auto is selected. Multi-word DMA is
automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO
3, and set to mode 2 for Fast PIO 4 / DMA.
M a i n M e n u
7