Brother P-TOUCH CUBE 사용자 설명서 - 페이지 16

{카테고리_이름} Brother P-TOUCH CUBE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-TOUCH CUBE 25 페이지. Tze tape
Brother P-TOUCH CUBE에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지)

페이지 인쇄

Print from Your Computer

Mac

Create Labels with P-touch Editor

Connect the label printer and your computer with the included USB cable.

Click Macintosh HD > Applications > P-touch Editor.

Select a new template or a template category.

• Press the Power Button twice quickly to feed and cut the tape.

• When the Auto Cut option is selected, the minimum print length is 0.98 in. / 25 mm.

• Before each initial print, the label printer feeds an approximately 1 in. / 25 mm of blank tape.

• We recommend not selecting the Auto Cut option when printing multiple labels less than 0.98 in. / 25 mm. This

will save tape.

• This label printer does not support Bluetooth connections for computers.

Configure Settings Using the Printer Setting Tool

Connect the label printer and your computer with the included USB cable.

Click Macintosh HD > Applications > Brother > Printer Setting Tool > Printer Setting Tool.

Select any of the Settings tabs, and then configure the settings.

Click Apply Settings to the Printer.

Click Exit.

• Check that the label printer you want to configure appears next to Printer. If a different label printer appears,

select the label printer from the drop-down list.

• Do not perform another job while changing the settings.

Auto Power On

Auto Power Off

Auto Power Off (Li-ion)

Length Adjustment

Configure whether the label printer turns on automatically when it is connected to a

USB AC adapter or a computer.

Set the period of time before the label printer turns off automatically when it is

connected to a USB AC adapter or a computer.

Set the period of time before the label printer turns off automatically.

Adjust the length of the printed label to match the length of the label displayed on the

computer.