AEG L 61470 BI 사용자 설명서 - 페이지 30

{카테고리_이름} AEG L 61470 BI에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L 61470 BI 36 페이지. Washing machines
AEG L 61470 BI에 대해서도 마찬가지입니다: 사용자 설명서 (36 페이지)

페이지 인쇄

30 www.aeg.com

Do not use an extension hose if

the inlet hose is too short. Con-

tact the service centre for the re-

placement of the inlet hose.

Water pressure

The appliance works correctly if the wa-

ter pressure is not less than 0.05 MPa

(0.5 bar).

Water-stop device

13.4 Water drainage

There are different procedures to con-

nect the drain hose:

With the plastic hose guide.

• Connect the water inlet hose to the

cold water tap with 3/4 thread.

CAUTION!

Make sure that there are no leaks

from the couplings.

If you can not connect the water inlet

hose to the cold water tap of the primary

hydraulic system, connect it to your do-

mestic cold water storage system.

Make sure not to have more than a dis-

tance of 5.02 m (16.5 ft) between the ap-

pliance inlet hose and the bottom of the

water storage tank.

The inlet hose has a water stop device.

This device prevents water leaks in the

hose because of its natural ageing. The

red sector in the window «A» shows this

fault .

If this occur, close the water tap and

contact the service centre to replace the

hose.