Brother P-touch H200 사용자 설명서 - 페이지 7
{카테고리_이름} Brother P-touch H200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch H200 19 페이지.
페이지 인쇄2
BASIC USAGE (Continued)
Printing Ribbons/Tapes (continued)
Using Print Options
[Numbering]
You can print a series of up to nine ribbons/tapes
at a time using auto-numbering. Using this feature
you can automatically increase a selected
number by one after each one is printed. The
numbers of ribbons/tapes you can print at one
time depend on the initial number.
Example: To print copies of a label containing a
serial number (0123, 0124 and 0125)
Enter numbers
to the number you want to increment
/
[Numbering]
/
• Select the highest number you want to be
printed when setting the number.
[Mirror]
Example: Follow the instructions below after
entering "J.SMITH" if you want to
Mirror Print "J.SMITH".
Enter text/characters
/
[Mirror]
• Use clear tape in [Mirror], so you can read the
labels correctly from the opposite side when
attached on glass, windows or other
transparent surfaces.
/
Move the cursor
+
+
[Mirror Print?]
Setting Margin (
/
/
[Full/Half/Narrow/Chain Print]
[Full]/[Half]/[Narrow]
For leaving equal margins on both sides of the
text.
Full
Half
ABC
25 mm
25 mm
[Chain Print]
Use this setting when printing several ribbon/tape
with minimum margins.
Enter text.
1.
Press
, then [Copies: ] appears.
2.
Press
/
3.
number keys to select the number of copies.
Press
. Printing starts, and then the
4.
message "Feed OK?" appears.
Press
to enter more text.
5.
Clear the text, enter the text for the next
6.
ribbon/tape, and then press
When the message "Feed OK?" appears after
7.
the last ribbon/tape is printed, press
After the tape is fed, press the cutter lever to
8.
cut off the chain of ribbons/tapes.
)
[Margin]
Narrow
ABC
12 mm
12 mm
4 mm
or enter a number with
.
ABC
4 mm
.