AEG L 85275 XFL 사용자 설명서 - 페이지 11
{카테고리_이름} AEG L 85275 XFL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L 85275 XFL 40 페이지.
AEG L 85275 XFL에 대해서도 마찬가지입니다: 사용자 설명서 (36 페이지)
페이지 인쇄
L
START/PAUSE BUTTON
Press button
to start or interrupt a
4
programme.
DELAY START BUTTON
Press button
to delay the start of a
5
programme from 30 minutes to 20 hours.
TIME SAVE BUTTON
Press button 6 to decrease the duration of
the programme.
– Press one time to set 'Shortened dura-
tion' for items with daily soil.
– Press two times to set 'Extra Quick' for
items with light soil.
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
Press button
7
to add rinsing phases to
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
THE STAIN-PREWASH
BUTTON
8
Press button
8
to add the stain and/or a
prewash phase to a programme.
Press the button again and again to acti-
vate one or two options. The related sym-
bol and the indicator bar comes on in the
display.
The value shows the total number of the rinses.
The indicator bar is fully filled when you set to the maximum
number of rinses.
The Stain symbol comes on when you activate the function.
The Prewash symbol comes on when you activate the func-
tion.
The indicator bar is not fully filled when you set only one of
the functions.
The indicator bar is fully filled when you set the two func-
tions.
4
5
6
7
STAIN
• Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
This function increases the programme
duration.
This function is not available with
a temperature lower than 40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this function
when you have laundry with a high level
of soil.
The set of this function increases
the programme duration.
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set pro-
gramme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the water
when the programme is completed.
TEMPERATURE BUTTON
Press button
to change the default
10
temperature. When the display shows
- -, the appliance does not heat the water.
ENGLISH
11
9
10
.