Brother TD-4000 사용자 설명서 - 페이지 29
{카테고리_이름} Brother TD-4000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother TD-4000 37 페이지. Serie td impressora de etiquetas
Brother TD-4000에 대해서도 마찬가지입니다: 소프트웨어 사용 설명서 (40 페이지), 매뉴얼 (20 페이지), (스페인어) 구 (40 페이지)
페이지 인쇄
Installing the Software
4 Controlling with ESC/P
Commands
Fonts and several bar codes are embedded within this machine. You can send
commands to print embedded characters and Bar code.
Available Commands
The available commands are Brother TD proprietary commands based on ESC/P.
The latest command tool can be downloaded from the following website.
http://solutions.brother.com
Choose your region (eg. Europe), your country, your model and Downloads for your
model.
Serial Cables
The pin assignments for the serial cables (RS-232C cables) which can be used with this
machine are shown in the table below. You can purchase the cables at an electronics
store. Do not use an interface cable that is longer than 2 metres.
Brother TD side
D-sub female, lock screw #4-40 (UNC).
Signal
Pin
Name
Number
DCD
1
RXD
2
TXD
3
DTR
4
GND
5
DSR
6
RTS
7
CTS
8
RI
9
It is not possible to connect a RS-232C cable and USB cable to the printer at the
•
same time.
The RS-232C serial connector part of this equipment is not Limited Power Source.
•
Pin Assignments
PC side
(D-Sub9P female)
Pin
Signal
Number
Name
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI
26
STEP
1
STEP
2
STEP
3