Brother MFC-5860CN 빠른 설정 매뉴얼 - 페이지 25

{카테고리_이름} Brother MFC-5860CN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-5860CN 34 페이지. Mfc-5460cn; mfc-5860cn
Brother MFC-5860CN에 대해서도 마찬가지입니다: 설정 매뉴얼 (23 페이지), 빠른 설정 매뉴얼 (34 페이지), 서비스 매뉴얼 (9 페이지)

페이지 인쇄

Installing the Driver & Software

For USB Interface Users

(For Mac OS

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on pages 4 through 13.

Note

For Mac OS

X 10.2.0 to 10.2.3 users, upgrade to

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

http://solutions.brother.com)

Lift the scanner cover until it locks securely into

the open position.

Connect the USB cable to the USB socket

marked with a

USB socket inside the machine on the right as

shown below.

X 10.2.4 or greater)

X, visit

symbol. You will find the

Carefully guide the USB cable into the trench

as shown below, following the trench around

and toward the back of the machine. Then,

connect the cable to your computer.

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock (

Gently push the scanner cover support

down (

) and close the scanner cover (

Note

Make sure that the machine is turned on by

connecting the power cord.

Turn on your Macintosh

Put the supplied CD-ROM into your CD-ROM drive.