Fujitsu M3093GX 운영자 매뉴얼 - 페이지 21

{카테고리_이름} Fujitsu M3093GX에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu M3093GX 50 페이지. Departmental document scanner
Fujitsu M3093GX에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지), 청소 지침 매뉴얼 (12 페이지), 설치 절차 (5 페이지)

페이지 인쇄
Fujitsu M3093GX 운영자 매뉴얼

4.2 Reading a Document in Flatbed Mode

4.2.1 Reading a standard-size document

4 – 2
This section explains how to read a document placed on the document
bed.
If the size of the document is smaller than the document bed, read the
document using the following procedure:
1
Open the document cover.
2
Place the document face down on the document board. Correct
any curled or folded parts of the document.
3
Position the long side (in landscape mode) or the short side (in
portrait mode) of the document to the left side of the document
bed.
4
Position the left top of the document to the reference mark. If the
document is not placed correctly, reading cannot be done cor-
rectly.
5
Close the document cover slowly. If the document cover is
closed too quickly, the document may move.
6
Read the document. Do not press on or open the document cover
during the read operation.
7
After reading, open the document cover to remove the document.