Fujitsu ScanPartner 15C 사용자 설명서 - 페이지 14
{카테고리_이름} Fujitsu ScanPartner 15C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanPartner 15C 26 페이지. Image scanner
Fujitsu ScanPartner 15C에 대해서도 마찬가지입니다: 사용자 설명서 (23 페이지), 사양 (2 페이지), 업그레이드 매뉴얼 (6 페이지), 소모품 교체 및 청소 지침 (7 페이지), 설치 절차 (5 페이지)
페이지 인쇄
2 2 . . 7 Connecting the Cable
i). Turning the Power Off
Depress the side marked "O" to turn the power off.
Connect the power cable and SCSI signal cable as shown in Figure 2-8.
ii). Turning the Power On
Depress the side marked "I" to turn the power on. The POWER LED will light up. If
not, please check the power source.
iii). SCSI Termination
The Fujitsu ScanPartner 15C comes complete with a built in SCSI terminator. If the
scanner is the last device in a SCSI chain the terminator should be switched on. If
the scanner is not the last device the terminator should be off. The terminator
on/off switch is located on the back of the scanner, to the left of the SCSI cable
connectors.
Host PC
Term.
Host PC
Term.
scanner
(Terminator Off)
scanner
(Terminator On)
2-9
SCSI Device
Term.