Fujitsu ScanSnap S300 시작하기 매뉴얼 - 페이지 34
{카테고리_이름} Fujitsu ScanSnap S300에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap S300 37 페이지. Color image scanner
Fujitsu ScanSnap S300에 대해서도 마찬가지입니다: 설치 절차 (3 페이지), 사양 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
5.3 Cleaning Inside of the Scanner
Clean inside of the scanner with a cloth moistened with Cleaner F1.
In an alternating succession of scanning documents, the accumulated paper-powder and
dust inside the scanner causes a scanning error.
As a guideline, clean the ADF every 200 sheets of documents. Note that this guideline
varies according to the type of documents you are scanning. For example, the ADF must
be cleaned more frequently when scanning documents on that the toner has not been
sufficiently fixed on.
Clean the ADF according to the following procedure referring to the illustrations.
ATTENTION
1.
Open the ADF while pulling the Cover open lever.
Cover open lever
2.
Clean the following locations with a cloth moistened with Cleaner F1.
33
• Never use water or neutral detergent to clean the inside of the scanner.
• Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt
and dust to enter the scanner, resulting in the scanner failure, malfunction
and image error.
ADF
Cloth
Cleaner F1 or
neutral detergent
Paint thinner