Brother HL-4150CDN 사용자 설명서 - 페이지 13

{카테고리_이름} Brother HL-4150CDN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-4150CDN 20 페이지. Printer
Brother HL-4150CDN에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 안전 및 법률 (21 페이지), 매뉴얼 (25 페이지)

페이지 인쇄

Printing Methods

• with each side folded as shown in figure below

If you use any of the types of envelopes listed above, they may damage your machine. This damage may

not be covered under any Brother warranty or service agreement.

Labels

The machine will print on most types of labels designed for use with a laser machine. Labels should have an

adhesive that is acrylic-based since this material is more stable at the high temperatures in the fuser unit.

Adhesives should not come in contact with any part of the machine, because the label stock may stick to the

drum unit or rollers and cause jams and print quality problems. No adhesive should be exposed between the

labels. Labels should be arranged so that they cover the entire length and width of the sheet. Using labels

with spaces may result in labels peeling off and causing serious jams or print problems.

All labels used in this machine must be able to withstand a temperature of 200 degrees centigrade

(392 degrees Fahrenheit) for a period of 0.1 seconds.

Types of labels to avoid

Do not use labels that are damaged, curled, wrinkled or an unusual shape.

IMPORTANT

• Avoid feeding labels with the carrier sheet exposed because your machine will be damaged.

• Label sheets should not exceed the paper weight specifications described in this User's Guide. Labels

exceeding this specification may not feed or print properly and may cause damage to your machine.

• DO NOT to reuse or insert labels that have previously been used or is missing few labels on the sheet.