Fujitsu ETERNUS4000 400 매뉴얼 - 페이지 20

{카테고리_이름} Fujitsu ETERNUS4000 400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS4000 400 28 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS4000 400에 대해서도 마찬가지입니다: 매뉴얼 (21 페이지), 서버 연결 매뉴얼 (25 페이지), 서버 연결 매뉴얼 (32 페이지), 연결 매뉴얼 (19 페이지)

페이지 인쇄

Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server

7.2 Setting Up the Server

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Enable CHAP authentication.

Enable CHAP authentication on the Initiator.

# iscsiadm modify initiator-node --authentication CHAP

Check that CHAP is enabled on the Initiator.

Use the "initiator-node" option.

# iscsiadm list initiator-node

Initiator node name: iqn.1986-03.com.sun:01:00144f565a49.47677520

Initiator node alias: -

Header Digest: NONE/-

Data Digest: NONE/-

Authentication Type: CHAP

CHAP Name: initiator

RADIUS Server: NONE

RADIUS access: unknown

Configured Sessions: 1

Check that CHAP is enabled on the Target.

Use the "target-param" option.

# iscsiadm list target-param -v

Target: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm1

Alias: dxlcm1port1

Bi-directional Authentication: disabled

Authentication Type: CHAP

CHAP Name: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm1

Target: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0

Alias: dxlcm0port1

Bi-directional Authentication: disabled

Authentication Type: CHAP

CHAP Name: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0

If CHAP is disabled, use the "iscsiadm" command to enable it.

# iscsiadm modify target-param -a CHAP Target_name

Example:

To set "iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0" and "iqn.2000-

09.com.fujitsu:storage-system.e2000:00001001-cm1" as the target CHAP names

#iscsiadm modify target-param -a CHAP iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0

#iscsiadm modify target-param -a CHAP iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm1

End of procedure