Brother TD-4100N 사용자 설명서 - 페이지 10

{카테고리_이름} Brother TD-4100N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother TD-4100N 36 페이지. Network users manual - spanish
Brother TD-4100N에 대해서도 마찬가지입니다: 기술 사양 (4 페이지), 소프트웨어 사용 설명서 (40 페이지), 네트워크 사용 설명서 (39 페이지), 사용자 설명서 (37 페이지), 매뉴얼 (20 페이지), (스페인어) 구 (40 페이지), (스페인어) 매뉴얼 델 유저리오 (39 페이지)

Protocols

Protocols are the standardized sets of rules for transmitting data on a network. Protocols allow users to gain

access to network connected resources.

The print server used on this Brother product supports the TCP/IP (Transmission Control Protocol/Internet

Protocol) protocol.

TCP/IP is the most popular set of protocols used for communication such as Internet and E-mail. This protocol

can be used in almost all operating systems such as Windows

The following TCP/IP protocols are available on this Brother product.

Note

You can configure the protocol settings by using HTTP (web browser). See Using Web Based

Management (web browser) to change the print server settings on page 12.

DHCP/BOOTP/RARP

By using the DHCP/BOOTP/RARP protocols, the IP address can be automatically configured.

Note

To use the DHCP/BOOTP/RARP protocols, contact your network administrator.

APIPA

If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a

DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically

assign an IP address from the range 169.254.0.1 to 169.254.255.254.

DNS client

The Brother print server supports the Domain Name Service (DNS) client function. This function allows the

print server to communicate with other devices by using its DNS name.

LPR/LPD

Commonly used printing protocols on a TCP/IP network.

Port9100

Another commonly used printing protocol on a TCP/IP network.

Telnet

The Brother print server supports Telnet server for command line configuration.

and Linux.

Introduction