Brother DCP-8150DN 빠른 설정 매뉴얼 - 페이지 12

{카테고리_이름} Brother DCP-8150DN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-8150DN 23 페이지. Quick setup guide - english
Brother DCP-8150DN에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 고급 사용자 설명서 (50 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 사용자 설명서 (23 페이지), 제품 안전 매뉴얼 (23 페이지)

페이지 인쇄
Brother DCP-8150DN 빠른 설정 매뉴얼
USB
For USB Interface Users
(Mac OS X 10.5.8 - 10.7.x)
11
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
Important
For users of Mac OS X 10.5.7 or lower, upgrade
to Mac OS X 10.5.8 - 10.7.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/.)
Note
If you want to add the PS driver (BR-Script3
printer driver), please go to the Brother Solutions
Center at http://solutions.brother.com/ and visit
FAQ's on your model page for instructions.
b
Connect the USB cable to the USB port
marked with the
and then connect the cable to your Macintosh.
c
Make sure your machine's power switch is on.
12
symbol on your machine
12
Install MFL-Pro Suite
a
Put the installer CD-ROM into your CD-ROM
drive.
b
Double-click the Start Here OSX icon. If
prompted, select your model and then follow
the on-screen instructions.
Important
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
c
Choose your machine from the list, and then
click OK.
d
When this screen appears, click Next.
The installation of MFL-Pro Suite is now
complete.
Go to step 13 on page 13.
Macintosh