Fujitsu SLR 100 GBYTE 운영 매뉴얼 - 페이지 17

{카테고리_이름} Fujitsu SLR 100 GBYTE에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SLR 100 GBYTE 21 페이지.

Magnetic tape cartridges and cleaner cartridges (dry cleaning) for the drive can be

ordered directly from:

Siemens Plus Sales Office

Telephone: Germany 0180 52 52 723, Fax: 0180 52 52 724

or via Internet http://www.siemensplus.de

Although magnetic tape cartridges do not require any special maintenance, some basic rules should

be followed:

The cartridges must never be stored in high temperatures.

The cartridges are not to be stored or operated in high-humidity and in dusty

environments.

The cartridges must be kept out of direct sunlight.

The cartridges are not to be placed near magnetic fields.

Do not turn off the system or remove the cartridge from the streamer when the tape drive

is reading from or writing to the cartridge.

Always leave the protective cover over the opening for the write/read head. Never touch

the magnetic tape.

Always observe the conditions for storing archiving cartridges (see the chapter

data").

Always keep the cartridges in the protective covers provided.

New cartridges should be acclimatized to the ambient temperature up to four hours prior

to use.

As a rule, new cartridges should be wound forward once to the end of the tape and

rewound to the beginning, and the drive then cleaned using a cleaning cartridge (see the

chapter "Cleaning".)

Inserting a tape cartridge

When inserting the tape cartridge, ensure that the label side is facing up. The side on

which the magnetic tape is visible must be on the right.

Slide the cartridge slowly into the drive until the autoload mechanism starts pulling the cartridge

in.

Once initialization has been completed, the "Ready" indicator is illuminated.

Removing a tape cartridge

Push the eject button.

The ongoing command is terminated and buffered data will be written to the tape. Depending on the

application, the inserted cartridge will be rewound. This may take up to three minutes. The cartridge

will then be ejected from the unloading mechanism.

Remove the tape cartridge from the drive.

The eject button can be locked using an SCSI command (Prevent Media Removal).

If a magnetic tape cartridge cannot be removed from the drive in the way described, and

the eject button is not locked, please contact our customer service center.

A26361-H583-Z100-1-7419

SLR 25/50 Gbyte

"Technical

English - 9