Brother ADS-4900W 빠른 설정 매뉴얼 - 페이지 2
{카테고리_이름} Brother ADS-4900W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother ADS-4900W 11 페이지.
Brother ADS-4900W에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (10 페이지)
페이지 인쇄
4
Connect your machine and install software
Select your preferred scanning method and choose your connection method.
A
Using your scanner with your computer or mobile device
Visit
setup.brother.com
install Brother software.
setup.brother.com
For Mac: Visit
support.brother.com/mac
download Brother software.
B
Using your scanner as a standalone device (ADS-3300W/ADS-4300N/ADS-4700W/
ADS-4900W only)
Connect your machine to your network using a network cable (purchased separately) or via Wi-Fi
You can set up your Wi-Fi connection either using the machine's control panel or using your computer.
Manual Wireless Setup (ADS-3300W/ADS-4700W/ADS-4900W only)
If you do not have a computer connected to the network or if you cannot connect your machine using your computer, try to set up the
connection manually.
1. Press
> [Find Wi-Fi
Network] > [Yes].
2. Select the SSID
(Network Name).
Enter the Network Key
(Password).
NOTE
If setup is not successful, visit support.brother.com for FAQs, Troubleshooting, and manuals. For product specifications,
see the Online User's Guide.
LED Indications (ADS-3100/ADS-4300N only)
Off
Lit
Blinking
For more information about troubleshooting your machine, see the Online User's Guide.
2
to download and
to
When the wireless setup is
successful, the LCD displays
[Connected].
If you cannot find your SSID or
Network Key, ask your network
administrator or wireless access
point/router manufacturer.
Machine Status
Ready
(Blinking slowly)
Sleep
Follow the on-screen
instructions to continue
installation.
For Mobile Devices:
• Set up the connection
manually.
• You can also connect
to your machine if it
is connected to your
router/access point
using a LAN cable. For
more information, see
the Online User's Guide.
NOTE
• If setup is not successful, restart your machine
• If using a computer, go back to
Error Status
• Document Jam
• Pick Up Document Error
• Front Cover Open
• Multifeed Detection Error
(ADS-4300N only)
• Access Error
Finish
When finished, restart your computer.
• To check for the latest firmware, visit
support.brother.com/up7.
• If not successful, try to set up the
connection manually.
For detailed scanning instructions, see
the Online User's Guide at support.
brother.com/manuals.
.
®
and the wireless access point/router, and then
repeat these steps.
software.
• Scheduled Maintenance
Notification
• Pick Up Roller
Replacement Notification
A
to install