Brother DSmobile 920DW 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} Brother DSmobile 920DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DSmobile 920DW 6 페이지.

페이지 인쇄

Scan a document to the

memory card

NOTE

•

To scan a document using your computer (TWAIN Mode),

you must install scanner drivers and software (see step 5)

and connect your computer to the scanner (see

Connecting your scanner to your computer in TWAIN Mode

in the User's Guide).

Make sure that the SD Memory Card is in the scanner's

memory card slot.

Press the Power button

to turn on your scanner.

Make sure that SD appears on

the scanner's LCD panel.

Insert your document, face up,

into the feeder slot.

Align the document with the left edge b of the feeder slot.

Slide the document guide c until it touches the right side

of the document.

For DSmobile 920DW: When you perform duplex

scanning, insert the first page face up into the feeder slot.

Gently push the document until you feel its top edge touch

the inside of the scanner.

Scanning begins automatically. The scanned image will be

saved on the SD Memory Card.

Browse scanned images

using a wireless network

NOTE

•

If you have not set a Wi-Fi

set up a network password in your web browser first. For

more information on setting password, see Setting

Wi-Fi

network password in the User's Guide.

•

Without a Wi-Fi

can be viewed and stolen by a third party.

Locate the scanner on your

wireless network

Slide the Wi-Fi

end of your scanner to ON.

Wait for about 40 seconds, until

the Wi-Fi

LED turns from red

to blue.

Activate the Wi-Fi

your wireless equipment (computer, smartphone, tablet,

etc.) so that it can search for your scanner.

On your wireless device, select your scanner's SSID,

Brother DS-820W-xxxx (Brother DS-920DW-xxxx).

(where xxxx = your scanner's Media Access Control (MAC)

address)

network password, be sure to

network password, data on your SD card

switch on the

function of

Browse for scanned images on your

scanner's memory card

Make sure that the SD Memory Card is in the scanner's

memory card slot.

Launch a web browser on your wireless device and type

http://10.10.100.1 (your scanner's HTTP address) in the

address bar.

When you first view scanned images, the Password Setup

screen will appear. Set a password and click Apply.

If you have already set your password, log in by entering

your password.

Your scanner's home

page appears in the

browser.

When there are scanned

images saved on the

memory card, these

images will appear in the

home screen.

NOTE

•

You can also view scanned images stored on the memory

card by inserting the memory card directly into your

computer's memory card slot (if applicable).

•

After viewing the scanned data, slide the Wi-Fi

OFF to save the battery.

View scanned images using

Android

/ iOS

To use ScanHub

from your scanner, install the application from Google Play

(Android

) or the App Store (iOS) onto your wireless

equipment (computer, smartphone, tablet, etc.).

NOTE

•

If you have not set a Wi-Fi

set up a network password in your web browser first. For

more information on setting password, see Setting

Wi-Fi

network password in the User's Guide.

•

Without a Wi-Fi

network password, data on your SD card

can be viewed and stolen by a third party.

Storage service on Brother Online

Brother Online can provide you the document management service

for your scanned images.

For more information, visit to check

http://www.brother.com/product/brotheronline/.

Install scanner drivers

and scanning software

NOTE

•

Make sure that your computer is ON and you are logged on

with Administrator rights.

•

If your computer does not have a DVD-ROM drive,

download the scanner driver from Brother Solutions Center

at http://solutions.brother.com/.

switch to

for browsing or downloading images

network password, be sure to