Fujitsu D2671 기술 매뉴얼 - 페이지 9

{카테고리_이름} Fujitsu D2671에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D2671 41 페이지. For rx200 s4

Important notes

Modules with electrostatic-sensitive components

Boards with electrostatic sensitive devices (ESD) are marked with the following

label:

Figure 1: ESD label

You must follow the instructions below when handling modules containing

electrostatic-sensitive components

You must always discharge yourself of static charges (e.g. by touching a

grounded object) before touching the components.

The equipment and tools you use must be free of static charges.

Remove the power plug from the power socket before inserting or removing

boards containing ESDs.

Always hold boards with ESDs by theit edges.

Do not touch any exposed pins or conductors on a component.

Use a grounding cable designed for this purpose to connect yourself to the

system unit as you install/deinstall the board.

Place all components on a static-free surface.

You will find a detailed description for handling ESD components in the

relevant European or international standards (EN 61340-5-1,

ANSI/ESD S20.20).

D2671 (RX200 S4)

Technical Manual

Notes on safety