Indesit SIXL145SUK 서비스 정보 매뉴얼 - 페이지 14

{카테고리_이름} Indesit SIXL145SUK에 대한 서비스 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit SIXL145SUK 28 페이지. Moon washing machines

Indesit

Company

THE CONDUCTIVITY SENSOR

THE VENT TUBE

Service Manual UK

The appliance is equipped with a conductivity sensor.

The sensor is located on the plastic tub next to the OKO

sump hose.

The sensor manages the 30 minute or daily programme.

The appliance does not have a pre-set fixed pH value:

During the first cycle after installation the machine runs an auto setting

cycle with 5 rinses which allows it to detect the water alkalinity and

calibrate itself. The auto setting cycle is repeated every 50 cycles.

During normal operation the machine will load with water and at this point

an alkalinity reading is taken by the sensor / software. If no alkalinity is

detected (detergent), the machine will activate the standard 30 minute

wash cycle.

If detergent is detected (from clothes that have been washed by hand),

2 x 15 minute rinse cycles will be activated.

14 of 28

The vent tube is connected to the part

of the tub where the water inlet

dispenser hose is normally connected;

at the other end the steam outlet hose

is located next to the water inlet valve.

English